Pairing the REMOTE FOB to the OPEN sign.
What you will need:
- Paperclip, push pin or similar pointed object.
- For initial pairing, stay within 3 feet of sign.
- Read through the below instructions once before getting started.
Pairing Procedure.
1) On the back of the sign, locate the pin hole labeled "Remote Pairing".
2) Use the end of the pointed object to press the "Remote Pairing" button ONCE.
3) Within 10 seconds, press any button ONCE, on the Remote Fob.
4) Wait 5 seconds for the pairing process to complete.
Reasons pairing process did not work.
On step 2, the "Remote Pairing" button was not pressed.
On step 3, the pairing process was cancelled since no button was pressed within 10 seconds.
On step 2 and 3, the buttons were pressed more than once.
To try again, simply wait 10 seconds and retry.